cold shut मीनिंग इन हिंदी

उदाहरण वाक्य

1. Cold shut-down is accomplished with control rod insertion ( as in BWRs ).
2. The most common defects are misruns and cold shuts.
3. "Misruns " and " cold shuts " are closely related and both involve the material freezing before it completely fills the mold cavity.
4. The speed of the material is important because if the material is traveling too slowly it can cool before completely filling, leading to misruns and cold shuts.
5. The flood and resulting fire was called " one of the most serious safety incidents in recent years " and resulted in a three-year cold shut-down of the plant.
6. The extreme cold shuts down metabolic function, so even if circulation stops, the cold may preserve the brain and other organs temporarily by decreasing their need for oxygen and nutrients.
7. The source of the defect remains unknown, but may have been caused initially by a " cold shut ", where the molten metal does not fuse together during metal casting.
8. The remains of the No . 4 reactor building were enclosed in a large cold shut-down phase; the enclosure was built quickly as occupational safety for the crews of the other undamaged reactors at the power station, with No . 3 continuing to produce electricity into 2000.
9. For this to be carried out in for example, a pressurized water reactor-the most common reactor design for electricity generation-the reactor would have to prematurely reach cold shut down after only recently being fueled, meaning that the reactor would need to cool decay heat and then have its reactor pressure vessel be depressurized, followed by a fuel rod defueling.